ISO/TS 10303-1760:2014-02 Pre defined product data management specializations


Application module: Pre defined product data management specializations	ISO/TS 10303-1760:2014-02(E) © ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms

4 Information requirements
4.1 Required AM ARMs
4.2 ARM constant definitions
4.3 ARM type definition
4.4 ARM entity definitions
4.5 ARM subtype constraint definitions
5 Module interpreted model
5.1 Mapping specification
5.2 MIM EXPRESS short listing
5.2.1 MIM type definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G
D MIM EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.1 Mapping specification

In the following, "Application element" designates any entity data type defined in Clause 4, any of its explicit attributes and any subtype constraint. "MIM element" designates any entity data type defined in Clause 5.2 or imported with a USE FROM statement, from another EXPRESS schema, any of its attributes and any subtype constraint defined in Clause 5.2 or imported with a USE FROM statement.

This clause contains the mapping specification that defines how each application element of this part of ISO 10303 (see Clause 4) maps to one or more MIM elements (see Clause 5.2).

The mapping for each application element is specified in a separate subclause below. The mapping specification of an attribute of an ARM entity is a subclause of the clause that contains the mapping specification of this entity. Each mapping specification subclause contains up to five elements.

Title: The clause title contains:

the name of the considered ARM entity or subtype constraint, or
the name of the considered ARM entity atribute when this attribute refers to a type that is not an entity data type or a SELECT type that contains or may contain entity data types, or
a composite expression, <attribute name> to <referred type>, when this attribute refers to a type that is not an entity data type or a SELECT type that contains or may contain entity data types.

MIM element: This section contains, depending on the considered application element:

the name of one or more MIM entity data types;
the name of a MIM entity attribute, presented with the syntax <entity name>.<attribute name>, when the considered ARM attribute refers to a type that is not an entity data type or a SELECT type that contains or may contain entity data types;
the term PATH, when the considered ARM entity attribute refers to an entity data type or to a SELECT type that contains or may contain entity data types;
the term IDENTICAL MAPPING, when both application objects involved in an application assertion map to the same instance of a MIM entity data type;
the term NO MAPPING EXTENSION PROVIDED, when the extension to an extensible SELECT TYPE has no impact;
the syntax /SUPERTYPE(<supertype name>)/, when the considered ARM entity is mapped as its supertype;
one or more constructs /SUBTYPE(<subtype name>)/, when the mapping of the considered ARM entity is the union of the mapping of its subtypes.

When the mapping of an application element involves more than one MIM element, each of these MIM elements is presented on a separate line in the mapping specification, enclosed between parentheses or brackets.

Source: This section contains:

the ISO standard number and part number in which the MIM element is defined, for those MIM elements that are defined in a common resource document;
the ISO standard number and part number of this part of ISO 10303, for those MIM elements that are defined in the MIM schema of this part.

This section is omitted when the keywords PATH or IDENTICAL MAPPING or NO MAPPING EXTENSION PROVIDED are used in the MIM element section.

Rules: This section contains the name of one or more global rules that apply to the population of the MIM entity data types listed in the MIM element section or in the reference path. When no rule applies, this section is omitted.

A reference to a global rule may be followed by a reference to the subclause in which the rule is defined.

Constraint: This section contains the name of one or more subtype constraints that apply to the population of the MIM entity data types listed in the MIM element section or in the reference path. When no subtype constraint applies, this section is omitted.

A reference to a subtype constraint may be followed by a reference to the subclause in which the subtype constraint is defined.

Reference path: This section contains:

the reference path to its supertypes in the common resources, for each MIM element created within this part of ISO 10303;
the specification of the relationships between MIM elements, when the mapping of an application element requires to relate instances of several MIM entity data types. In such a case, each line in the reference path documents the role of a MIM element relative to the referring MIM element or to the next referred MIM element.

For the expression of reference paths and of the constraints between MIM elements, the following notational conventions apply:

[]	enclosed section constrains multiple MIM elements or sections of the reference path are required to satisfy an information requirement;
()	enclosed section constrains multiple MIM elements or sections of the reference path are identified as alternatives within the mapping to satisfy an information requirement;
{}	enclosed section constrains the reference path to satisfy an information requirement;
<>	enclosed section constrains at one or more required reference path;
\|\|	enclosed section constrains the supertype entity;
->	the attribute, whose name precedes the -> symbol, references the entity or select type whose name follows the -> symbol;
<-	the entity or select type, whose name precedes the <- symbol, is referenced by the entity attribute whose name follows the <- symbol;
[i]	the attribute, whose name precedes the [i] symbol, is an aggregate; any element of that aggregate is referred to;
[n]	the attribute, whose name precedes the [n] symbol, is an ordered aggregate; member n of that aggregate is referred to;
=>	the entity, whose name precedes the => symbol, is a supertype of the entity whose name follows the => symbol;
<=	the entity, whose name precedes the <= symbol, is a subtype of the entity whose name follows the <= symbol;
=	the string, select, or enumeration type is constrained to a choice or value;
\	the reference path expression continues on the next line;
*	one or more instances of the relationship entity data type may be assembled in a relationship tree structure. The path between the relationship entity and the related entities, is enclosed with braces;
--	the text following is a comment or introduces a clause reference;
*>	the select or enumeration type, whose name precedes the > symbol, is extended into the select or enumeration type whose name follows the > symbol;
<*	the select or enumeration type, whose name precedes the <* symbol, is an extension of the select or enumeration type whose name follows the <* symbol;
!{}	section enclosed by {} indicates a negative constraint placed on the mapping.

The definition and use of mapping templates is not supported in the present version of the application modules. However, use of predefined templates /SUBTYPE/ and /SUPERTYPE/ is supported.

5.1.1 External_source_identification

This application object, External_source_identification, is defined in the module external_item_identification_assignment. This mapping section extends the mapping of External_source_identification, to include assertions defined in this module.

5.1.1.1 External_source_identification to Externally_defined_activity_relationship (as item)

Reference path:

applied_external_identification_assignment.items[i]-> external_identification_item
external_identification_item *> pdpdms_external_identification_item
pdpdms_external_identification_item = action_relationship

5.1.1.2 External_source_identification to Externally_defined_security_classification (as item)

Reference path:

5.1.1.3 External_source_identification to Externally_defined_address_assignment (as item)

Reference path:

5.1.1.4 External_source_identification to Externally_defined_organization_or_person_in_organization_assignment (as item)

Reference path:

applied_external_identification_assignment.items[i]-> external_identification_item
external_identification_item *> pdpdms_external_identification_item
(pdpdms_external_identification_item = applied_organization_assignment)
(pdpdms_external_identification_item = applied_person_and_organization_assignment)

5.1.1.5 External_source_identification to Externally_defined_approval_status (as item)

Reference path:

5.1.1.6 External_source_identification to Externally_defined_approval (as item)

Reference path:

applied_external_identification_assignment.items[i]-> external_identification_item
external_identification_item *> pdpdms_external_identification_item
pdpdms_external_identification_item = approval

5.1.1.7 External_source_identification to Externally_defined_date_or_date_time_assignment (as item)

Reference path:

applied_external_identification_assignment.items[i]-> external_identification_item
external_identification_item *> pdpdms_external_identification_item
(pdpdms_external_identification_item = date_assignment)
(pdpdms_external_identification_item = date_and_time_assignment)

5.1.1.8 External_source_identification to Externally_defined_work_request (as item)

Reference path:

5.1.1.9 External_source_identification to Externally_defined_work_request_status (as item)

Reference path:

5.1.2 Externally_defined_activity_relationship

MIM element:	action_relationship
Source:	ISO 10303-41
Reference path:	action_relationship !{(action_relationship.name = 'alternative') (action_relationship.name = 'decomposition') (action_relationship.name = 'derivation') (action_relationship.name = 'exclusiveness') (action_relationship.name = 'precedence') (action_relationship.name = 'sequence') (action_relationship.name = 'simultaneity')}

5.1.3 Externally_defined_security_classification

MIM element:	security_classification
Source:	ISO 10303-41
Reference path:	security_classification {security_classification.security_level -> security_classification_level !{(security_classification_level.name = 'unclassified') (security_classification_level.name = 'classified') (security_classification_level.name = 'proprietary') (security_classification_level.name = 'confidential') (security_classification_level.name = 'secret') (security_classification_level.name = 'top secret')}}

5.1.4 Externally_defined_address_assignment

MIM element:	organizational_address
Source:	ISO 10303-41
Reference path:	organizational_address !{(organizational_address.description = 'delivery address') (organizational_address.description = 'postal address') (organizational_address.description = 'visitor address')}

5.1.5 Externally_defined_organization_or_person_in_organization_assignment

MIM element:	(applied_organization_assignment) (applied_person_and_organization_assignment)
Source:	ISO 10303-1013
Reference path:	(applied_organization_assignment <= organization_assignment {organization_assignment.role -> organization_role organization_role organization_role.name !{(organization_role.name = 'author') (organization_role.name = 'classification officer') (organization_role.name = 'creator') (organization_role.name = 'editor') (organization_role.name = 'custodian') (organization_role.name = 'customer') (organization_role.name = 'design supplier') (organization_role.name = 'id owner') (organization_role.name = 'location') (organization_role.name = 'manufacturer') (organization_role.name = 'owner') (organization_role.name = 'read access') (organization_role.name = 'supplier') (organization_role.name = 'wholesaler') (organization_role.name = 'organization in contract') (organization_role.name = 'write access')}}) (applied_person_and_organization_assignment <= person_and_organization_assignment {person_and_organization_assignment.role -> person_and_organization_role person_and_organization_role person_and_organization_role.name !{(person_and_organization_role.name = 'author') (person_and_organization_role.name = 'classification officer') (person_and_organization_role.name = 'creator') (person_and_organization_role.name = 'editor') (person_and_organization_role.name = 'custodian') (person_and_organization_role.name = 'customer') (person_and_organization_role.name = 'design supplier') (person_and_organization_role.name = 'id owner') (person_and_organization_role.name = 'location') (person_and_organization_role.name = 'manufacturer') (person_and_organization_role.name = 'owner') (person_and_organization_role.name = 'read access') (person_and_organization_role.name = 'supplier') (person_and_organization_role.name = 'wholesaler') (person_and_organization_role.name = 'organization in contract') (person_and_organization_role.name = 'write access')}})

5.1.6 Externally_defined_approval_status

MIM element:	approval_status
Source:	ISO 10303-41
Reference path:	approval_status !{(approval_status.name = 'approved') (approval_status.name = 'disapproved') (approval_status.name = 'withdrawn') (approval_status.name = 'not yet approved')}

5.1.7 Externally_defined_approval

MIM element:	approval
Source:	ISO 10303-41
Reference path:	approval !{(approval.level = 'disposition') (approval.level = 'equipment order') (approval.level = 'planning')}

5.1.8 Externally_defined_date_or_date_time_assignment

MIM element:	(date_assignment) (date_and_time_assignment)
Source:	ISO 10303-41 41
Reference path:	(date_assignment date_assignment.role -> date_role date_role.name !{(date_role.name = 'creation') (date_role.name = 'installation') (date_role.name = 'production') (date_role.name = 'registration') (date_role.name = 'update') (date_role.name = 'planned') (date_role.name = 'actual') (date_role.name = 'start date') (date_role.name = 'end date') (date_role.name = 'release date') (date_role.name = 'request date')}) (date_and_time_assignment date_and_time_assignment.role -> date_time_role date_time_role.name !{(date_time_role.name = 'creation') (date_time_role.name = 'installation') (date_time_role.name = 'production') (date_time_role.name = 'registration') (date_time_role.name = 'update') (date_time_role.name = 'planned') (date_time_role.name = 'actual') (date_time_role.name = 'start date') (date_time_role.name = 'end date') (date_time_role.name = 'release date') (date_time_role.name = 'request date')})

5.1.9 Externally_defined_work_request

MIM element:	versioned_action_request
Source:	ISO 10303-41
Reference path:	versioned_action_request !{(versioned_action_request.purpose = 'change of standard') (versioned_action_request.purpose = 'cost reduction') (versioned_action_request.purpose = 'customer rejection') (versioned_action_request.purpose = 'customer request') (versioned_action_request.purpose = 'durability improvement') (versioned_action_request.purpose = 'government regulation') (versioned_action_request.purpose = 'production alignment') (versioned_action_request.purpose = 'procurement alignment') (versioned_action_request.purpose = 'production relief') (versioned_action_request.purpose = 'production requirement') (versioned_action_request.purpose = 'quality improvement') (versioned_action_request.purpose = 'security reason') (versioned_action_request.purpose = 'standardization') (versioned_action_request.purpose = 'supplier request') (versioned_action_request.purpose = 'technical improvement') (versioned_action_request.purpose = 'tool improvement')}

5.1.10 Externally_defined_work_request_status

MIM element:	action_request_status
Source:	ISO 10303-41
Reference path:	action_request_status !{(action_request_status.status = 'in work') (action_request_status.status = 'issued') (action_request_status.status = 'proposed') (action_request_status.status = 'resolved')}

5.1.11 Person_in_organization_relationship

MIM element:	applied_person_and_organization_assignment
Source:	ISO 10303-1013
Reference path:	applied_person_and_organization_assignment <= person_and_organization_assignment

5.1.11.1 description

MIM element:	person_and_organization_role.description
Reference path:	applied_person_and_organization_assignment <= person_and_organization_assignment person_and_organization_assignment.role -> person_and_organization_role person_and_organization_role.description

5.1.11.2 relation_type

MIM element:	person_and_organization_role.name
Reference path:	applied_person_and_organization_assignment <= person_and_organization_assignment person_and_organization_assignment.role -> person_and_organization_role person_and_organization_role.name

5.1.11.3 Person_in_organization_relationship to Person_in_organization (as relating)

MIM element:	PATH
Reference path:	applied_person_and_organization_assignment applied_person_and_organization_assignment.items[1] -> person_and_organization_item person_and_organization_item = person_and_organization person_and_organization

5.1.11.4 Person_in_organization_relationship to Person_in_organization (as related)

MIM element:	PATH
Reference path:	applied_person_and_organization_assignment <= person_and_organization_assignment person_and_organization_assignment.assigned_person_and_organization -> person_and_organization

5.1.12 Pre_defined_activity_relationship

MIM element:	action_relationship
Source:	ISO 10303-41
Reference path:	action_relationship {(action_relationship.name = 'alternative') (action_relationship.name = 'decomposition') (action_relationship.name = 'derivation') (action_relationship.name = 'exclusiveness') (action_relationship.name = 'precedence') (action_relationship.name = 'sequence') (action_relationship.name = 'simultaneity')}

5.1.13 Pre_defined_address_assignment

MIM element:	organizational_address
Source:	ISO 10303-41
Reference path:	organizational_address {(organizational_address.description = 'delivery address') (organizational_address.description = 'postal address') (organizational_address.description = 'visitor address')}

5.1.14 Pre_defined_approval

MIM element:	approval
Source:	ISO 10303-41
Reference path:	approval {(approval.level = 'disposition') (approval.level = 'equipment order') (approval.level = 'planning')}

5.1.15 Pre_defined_approval_status

MIM element:	approval_status
Source:	ISO 10303-41
Reference path:	approval_status {(approval_status.name = 'approved') (approval_status.name = 'disapproved') (approval_status.name = 'withdrawn') (approval_status.name = 'not yet approved')}

5.1.16 Pre_defined_date_or_date_time_assignment

MIM element:	(date_assignment) (date_and_time_assignment)
Source:	ISO 10303-41 41
Reference path:	(date_assignment date_assignment.role -> date_role date_role.name {(date_role.name = 'creation') (date_role.name = 'installation') (date_role.name = 'production') (date_role.name = 'registration') (date_role.name = 'update') (date_role.name = 'planned') (date_role.name = 'actual') (date_role.name = 'start date') (date_role.name = 'end date') (date_role.name = 'release date') (date_role.name = 'request date')}) (date_and_time_assignment date_and_time_assignment.role -> date_time_role date_time_role.name {(date_time_role.name = 'creation') (date_time_role.name = 'installation') (date_time_role.name = 'production') (date_time_role.name = 'registration') (date_time_role.name = 'update') (date_time_role.name = 'planned') (date_time_role.name = 'actual') (date_time_role.name = 'start date') (date_time_role.name = 'end date') (date_time_role.name = 'release date') (date_time_role.name = 'request date')})

5.1.17 Pre_defined_organization_or_person_in_organization_assignment

MIM element:	(applied_organization_assignment) (applied_person_and_organization_assignment)
Source:	ISO 10303-1013
Reference path:	(applied_organization_assignment <= organization_assignment {organization_assignment.role -> organization_role organization_role organization_role.name (organization_role.name = 'author') (organization_role.name = 'classification officer') (organization_role.name = 'creator') (organization_role.name = 'editor') (organization_role.name = 'custodian') (organization_role.name = 'customer') (organization_role.name = 'design supplier') (organization_role.name = 'id owner') (organization_role.name = 'location') (organization_role.name = 'manufacturer') (organization_role.name = 'owner') (organization_role.name = 'read access') (organization_role.name = 'supplier') (organization_role.name = 'wholesaler') (organization_role.name = 'organization in contract') (organization_role.name = 'write access')}) (applied_person_and_organization_assignment <= person_and_organization_assignment {person_and_organization_assignment.role -> person_and_organization_role person_and_organization_role person_and_organization_role.name (person_and_organization_role.name = 'author') (person_and_organization_role.name = 'classification officer') (person_and_organization_role.name = 'creator') (person_and_organization_role.name = 'editor') (person_and_organization_role.name = 'custodian') (person_and_organization_role.name = 'customer') (person_and_organization_role.name = 'design supplier') (person_and_organization_role.name = 'id owner') (person_and_organization_role.name = 'location') (person_and_organization_role.name = 'manufacturer') (person_and_organization_role.name = 'owner') (person_and_organization_role.name = 'read access') (person_and_organization_role.name = 'supplier') (person_and_organization_role.name = 'wholesaler') (person_and_organization_role.name = 'organization in contract') (person_and_organization_role.name = 'write access')})

5.1.18 Pre_defined_security_classification

MIM element:	security_classification
Source:	ISO 10303-41
Reference path:	security_classification {security_classification.security_level -> security_classification_level (security_classification_level.name = 'unclassified') (security_classification_level.name = 'classified') (security_classification_level.name = 'proprietary') (security_classification_level.name = 'confidential') (security_classification_level.name = 'secret') (security_classification_level.name = 'top secret')}

5.1.19 Pre_defined_work_request

MIM element:	versioned_action_request
Source:	ISO 10303-41
Reference path:	versioned_action_request {(versioned_action_request.purpose = 'change of standard') (versioned_action_request.purpose = 'cost reduction') (versioned_action_request.purpose = 'customer rejection') (versioned_action_request.purpose = 'customer request') (versioned_action_request.purpose = 'durability improvement') (versioned_action_request.purpose = 'government regulation') (versioned_action_request.purpose = 'production alignment') (versioned_action_request.purpose = 'procurement alignment') (versioned_action_request.purpose = 'production relief') (versioned_action_request.purpose = 'production requirement') (versioned_action_request.purpose = 'quality improvement') (versioned_action_request.purpose = 'security reason') (versioned_action_request.purpose = 'standardization') (versioned_action_request.purpose = 'supplier request') (versioned_action_request.purpose = 'technical improvement') (versioned_action_request.purpose = 'tool improvement')}

5.1.20 Pre_defined_work_request_status

MIM element:	action_request_status
Source:	ISO 10303-41
Reference path:	action_request_status {(action_request_status.status = 'in work') (action_request_status.status = 'issued') (action_request_status.status = 'proposed') (action_request_status.status = 'resolved')}

5.1.21 pdpdms_activity_relationship_subtypes

ONEOF is ensured by different values of attribute name from entity action_relationship.

Constraint:	action_relationship.name
Source:	ISO 10303-41

5.1.22 pdpdms_security_classification_subtypes

ONEOF is ensured by different values of attribute name from entity security_classification_level.

Constraint:	security_classification_level.name
Source:	ISO 10303-41

5.1.23 pdpdms_address_assignment_subtypes

ONEOF is ensured by different values of attribute description from entity organizational_address.

Constraint:	organizational_address.description
Source:	ISO 10303-41

5.1.24 pdpdms_organization_or_person_in_organization_assignment_subtypes

ONEOF is ensured by different values of attribute name from entity organization_role or by different values of attribute name from entity person_and_organization_role.

Constraint:	organization_role.name or person_and_organization_role.name
Source:	ISO 10303-41

5.1.25 pdpdms_approval_status_subtypes

ONEOF is ensured by different values of attribute name from entity approval_status

Constraint:	approval_status.name
Source:	ISO 10303-41

5.1.26 pdpdms_approval_subtypes

ONEOF is ensured by different values of attribute level from entity approval

Constraint:	approval.level
Source:	ISO 10303-41

5.1.27 pdpdms_date_or_date_time_assignment_subtypes

ONEOF is ensured by different values of attribute name from entity date_role

Constraint:	date_role.name
Source:	ISO 10303-41

5.1.28 pdpdms_work_request_subtypes

ONEOF is ensured by different values of attribute purpose from entity versioned_action_request

Constraint:	versioned_action_request.purpose
Source:	ISO 10303-41

5.1.29 pdpdms_work_request_status_subtypes

ONEOF is ensured by different values of attribute status from entity action_request_status

Constraint:	action_request_status.status
Source:	ISO 10303-41